Damp in an old house: gentle solutions

An old house requires a careful approach. However, you should not expect an instant result when the wall needs progressive drying.

Damp in an old house: gentle solutions

First observe stains, ventilation and wall coatings. In addition, observation should include stain position, surface condition and ventilation.

What to check before acting

Buried walls and cellars may have infiltrations that require other actions. Therefore, a leak, infiltration, flooding or condensation alone requires a different action first.

A safer choice

ATE is electromagnetic and must be placed low on a damp load-bearing wall. ATG is geomagnetic and works without electricity. However, the choice remains coherent only when the symptoms match rising damp.

Limits to understand

Humidistop sells online and provides clear information to guide the choice. Finally, realistic expectations help monitor wall improvement without confusing the causes.

Good practices to support the solution

In addition, keep regular ventilation and avoid blocking walls with coatings that are too closed. Then monitor the marks for several weeks, because a damp wall changes slowly. For example, less odour, a wall that feels less cold and stains that become more stable may indicate improvement. However, if water enters directly through a crack, a terrace, a pipe or a buried area, you should correct that water entry first.

What to remember before buying

Therefore, the right choice always depends on the probable cause and the building layout. ATE should be prioritised when you have a damp load-bearing wall accessible at the lower part and a power socket nearby. On the other hand, ATG may suit cases where installing a plugged-in ATE remains difficult. Finally, Humidistop sells its devices online and provides a clear choice guide to direct customers toward the most coherent model.