ATE LC30 PULSE wall drying device
Electromagnetic device for walls affected by rising damp
ATE LC30 PULSE: a device for damp walls
We manufacture the ATE LC30 PULSE in France to support the progressive drying of walls affected by rising damp. Its 30 m coverage diameter helps you choose a model suited to your building’s layout.
What area can it cover?
The stated diameter is 30 m, equivalent to a radius of 15 m. Check that this reach covers the affected zone. A diameter is not a floor area measured in square metres.
Operation and installation
The device operates continuously when connected to mains power. Fixing and electrical connection must follow our installation manual. No chemical injection into the walls is required.
How long can drying take?
The 18–24 month period is indicative. Progress depends on the materials, wall thickness, ventilation and installation conditions. It does not guarantee complete drying within a fixed period.
Check the cause of the damp
Our devices are intended for rising damp. Water ingress, leaks and condensation require solutions appropriate to their causes.
The reliable warranty you need
- 10-year manufacturer’s warranty
- Made in France
- Designed and developed by our team
- Direct sales from our factory
- Advice and assistance from our team
Simple and practical to use
- Coverage diameter: 30 m
- Installation according to our manual
- No chemical injection into the walls
- Progressive drying of the affected walls
Mains-powered
How to install your ATE device
Watch the installation steps and read the manual for your model to choose its position and follow the installation requirements.
Installation manual PDFATE LC30 PULSE features at a glance
- Electromagnetic technology
- Intended for rising damp
- Made in France
- Stated diameter: 30 m
How does the ATE LC30 PULSE work?
Rising damp occurs when ground water travels through the pores of building materials. The ATE LC30 PULSE uses Electromagnetic technology intended to support the progressive drying of affected walls. Choose the model according to its coverage and the building’s layout.
Coverage suited to your building
The ATE LC30 PULSE can be considered for a home, cellar or business premises when damp is caused by capillary rise. Check that the affected zone lies within the stated 30 m diameter.
ATE LC30 PULSE specifications
- Electromagnetic technology
- Intended for rising damp
- Made in France
- Stated diameter: 30 m
Mains-powered
10-year manufacturer’s warranty
Advice for correct installation
- Follow the position and distances specified in the manual
- Use the instructions for your chosen model
- Ensure appropriate ventilation in the building
Preparing for drying and decorating
Wall materials, finishes and ventilation influence drying. Follow the manual’s recommendations before renewing wall finishes.
Our devices are intended for rising damp. Water ingress, leaks and condensation require solutions appropriate to their causes.
Any questions?
Choosing between two models? Our team can help you compare coverage and installation requirements to select a device suited to your walls.
