
An ATE in an archive storage room in Saint-Denis
November 18, 2026Customer ATE LC30 installation beside stairs: two views
These two customer photographs show a Humidistop ATE LC30 mounted on a wall beside tiled stairs. The overall view and the side view show the same installation and its electrical supply.
An overall view of the customer installation
In the first photograph, the light grey housing is visible next to a power socket. Its supply cable connects to the mains adapter. Areas of plaster and old red paint remain visible on the wall; the tiled steps and floor show the surroundings.

A side view of the housing
The second photograph shows the same ATE LC30 from the side, including the depth of the housing, its position against the wall and the cable. Together, the two views illustrate an actual installation in an existing building.

Preparing your ATE LC30 project
ATE LC30 is a mains-powered electromagnetic device offered for walls affected by identified rising damp. Its stated coverage diameter is 30 metres, corresponding to a 15-metre radius measured from the actual installation point. Floor area alone is insufficient: compare distances on a plan and the conditions in the manual.
For your own installation, check the wall support, the available position and the continuous electrical supply required by the purchased model. A customer photograph illustrates an installation; the device manual remains the reference for your project.
Explore ATE LC30 · Compare devices and prices
This case presents the photographed installation. It does not include before-and-after measurements from which to conclude how moisture in the wall has changed.


