ATE Pulse White | Wall Drying | Treatment for Wall Dampness

🏠 Electronic Wall Drying System ATE PULSE 30 – Wall Drying and Rising Damp

This device is a wall-drying solution designed to reduce wall dampness linked to rising damp. This rising moisture phenomenon occurs when groundwater rises through porous materials, leaving walls damp and potentially encouraging stains and mould.

This limited-edition next-generation model delivers the same performance as the standard versions, with a more modern, discreet design that is easy to integrate into the home.

Thanks to its electromagnetic polarity inversion principle, this system acts progressively at the source, without chemical injection and without invasive work.

Understanding rising damp

Rising damp is a common problem: moisture from the ground rises through porous materials such as brick, stone or mortar. It acts directly at the source: it reverses the electromagnetic polarity of water molecules, pushing moisture back down into the ground – without chemicals or invasive work.

✅ Key benefits of the ATE LC30 Pulse

📏 Action radius: 15 metres
📐 Coverage diameter: 30 metres
🔇 Continuous, silent operation
🛠️ Maintenance-free
🇫🇷 Made in France – 10-year warranty
🚚 Fast, free delivery

ATE PULSE 30 user manuals

Download the installation manual in your language:

French – Download the manual
English – Download the manual
German – Download the manual
Italian – Download the manual
Portuguese – Download the manual
Spanish – Download the manual

ATE LC30 PULSE – A smart solution against wall dampness

Why wall dampness matters

Moisture can damage structures, cause mould and increase heating costs. One of the main causes is rising damp, which occurs when groundwater rises through porous materials due to the lack of a waterproof barrier.

✅ A modern answer: the ATE LC30 Pulse

It dries walls naturally, without drilling or chemicals. Thanks to certified low-frequency pulses, it reverses the moisture flow inside the wall and promotes long-lasting drying.

How it works

Damp walls generate a natural upward electric field. The device emits an inverse electromagnetic field, changing the direction of water within the wall. Moisture is pushed back down into the ground and gradually evaporates.

✔️ The process is completely silent, vibration-free and maintenance-free. Ideal for fragile or old walls.

Performance and benefits

✅ Treats rising damp at the source
✅ Visible results in 18 to 24 months
✅ Non-harmful waves (EMF certified)
✅ Extremely low consumption: 0.75 W (~€15/year)
✅ Made in France with a 10-year warranty
✅ Free and fast delivery

📏 Technical specifications

Radius: 15 metres (30 m diameter)

Dimensions: 272 x 206 x 25 mm

Power supply: 12 V – 0.75 W

Wall mounting: like a picture

Install on load-bearing walls, preferably damp (not on plasterboard lining)

Certifications:

Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

RoHS Directive 2011/65/EU

WEEE Directive 2012/19/EU

EMF test – Emitech Laboratory (safe waves)

🛠️ Installation recommendations

Place the device between 30 cm and 1 m from the floor

Keep at least 1.50 m away from any other electronic device

Fix securely to a load-bearing wall

Leave the device plugged in at all times

Measure the maximum diagonal of the room (max coverage 30 m)

🔄 Best practices for faster drying

Remove waterproof wall coverings 10 cm above the damp areas

Ensure good ventilation (natural or mechanical)

Adjust doors and add air vents if necessary

Restore with a lime-based plaster and anti-salt additive

Add drainage if there is lateral water pressure

⚠️ Important information

Results depend on the material, thickness, surface treatment and wall installation.
The device does not treat:

Water ingress/leaks

Flooding

Surface mould

➡️ These issues must be addressed separately to ensure full effectiveness.