ATE MAX Black | Wall Drying | Wall Moisture Treatment

🏠 Electronic Wall Drying System ATE MAX BLACK – Wall Drying & Rising Damp

Wall drying – The premium solution against rising damp

Wall moisture is a common issue in many buildings, often linked to rising damp: groundwater rises through porous materials such as brick, stone, or mortar. Over time, this wall moisture can cause mould, salt deposits, unpleasant odours, and a feeling of reduced thermal insulation.

This is a wall-drying solution based on electromagnetic polarity inversion technology. Designed to support the progressive drying of damp walls, it works without chemicals and without invasive work.

With coverage of up to 60 metres in diameter, this model is particularly well suited to large spaces and older buildings, when rising moisture affects multiple areas and a premium solution is required.

ATE MAX User Manuals

Download the installation manual in your language:

French – Download the manual
English – Download the manual
German – Download the manual
Italian – Download the manual
Portuguese – Download the manual
Spanish – Download the manual

⚙️ How does the ATE MAX work?

Walls naturally generate an electrical potential difference with the ground, which encourages moisture to rise.
This system emits a low-frequency electromagnetic field that reverses the polarity of water molecules contained in the walls.

➡️ Result: moisture is redirected and moves back down toward the foundations. The wall gradually dries naturally, without damaging the structure.

✅ Main benefits of the ATE MAX Black

📏 Wide coverage: 30 m radius (60 m diameter)

🔋 Continuous, maintenance-free operation

🔇 Silent, vibration-free, and chemical-free

🧱 Easy mounting on a damp load-bearing wall

⚡ Very low consumption: 0.75 W (~€15/year)

🇫🇷 Made in France – 10-year warranty

🛡️ EMF certification: safe for health (Emitech tests)

📦 Technical specifications

Dimensions: 322 x 232 x 32 mm

Power supply: 12 V

Consumption: 0.75 W

Operating range: 30 m radius (60 m diameter)

Installation: simple wall mounting (like a frame)

European compliance:

Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

RoHS Directive 2011/65/EU

WEEE Directive 2012/19/EU

EMF safety report (non-harmful waves)

🎯 Effectiveness and results

With correct installation and by following the recommendations, drying is generally visible within 18 to 24 months, depending on the building type and the level of moisture.

🛠️ Installation tips

Mounting height: 30 cm to 1 m above the floor

Wall type: damp load-bearing wall (never on a lining or dry partition)

Distance: at least 1.5 m from any electronic device

Power: keep permanently plugged in (very low consumption)

Position: do not move the device after installation

💡 Tips for optimal results

Remove waterproof coatings (paints, film-forming plasters) 10 cm above the damp area to let the wall “breathe”.

Ensure effective ventilation (mechanical ventilation/VMC, air vents, adjusted doors and windows).

After drying: brush off surface salts and apply a lime-based plaster with an anti-salt additive.

Install drainage in case of lateral water ingress.

⚠️ Treatment limitations

It is designed to treat rising damp.
It does not replace:

Repairs related to cracks, infiltrations, or water leaks

Treatments for mould or flood-related damage

👉 These issues require additional, specific solutions.