ATE LC15 Black | Wall Drying | Wall Moisture Treatment

Electronic Wall Drying System ATE LC15 BLACK – Wall Drying & Rising Damp

A long-lasting and innovative solution against rising damp

Wall moisture is frequently linked to rising damp: groundwater naturally rises through porous materials such as brick, stone, or concrete. Over time, this phenomenon can weaken walls, encourage mould growth, and reduce insulation efficiency, which impacts comfort.

This system is a wall-drying solution designed to support the progressive drying of damp walls, without chemicals and without invasive work. Thanks to its electromagnetic polarity inversion principle, it acts at the source of rising moisture, while remaining compact and easy to integrate into the home.

ATE LC15: a compact and effective solution

It uses electromagnetic polarity inversion to block rising damp directly at the source.
It emits low-intensity electromagnetic impulses that push moisture back down into the ground, where it is naturally released through evaporation.

✔️ A silent process, with no vibration, no maintenance, and completely safe—even for older buildings.

ATE LC15 User Manuals

Download the installation manual in your language:

French – Download the manual
English – Download the manual
German – Download the manual
Italian – Download the manual
Portuguese – Download the manual
Spanish – Download the manual

How the ATE LC15 works

Each wall naturally generates an electrical potential difference that draws water upward.
This device neutralises that effect thanks to an opposing electromagnetic field.

Result: water molecules change polarity, move back down by gravity, and gradually leave the walls over the months.

Technical specifications

Operating range: 7.5 m (15 m diameter)

Dimensions: 322 × 232 × 32 mm

Consumption: 0.75 W (~€15/year)

Power supply: 12 V

Installation: wall mounting on a damp load-bearing wall (never on a lining)

Warranty: 10 years

Certifications:
✔️ Low Voltage Directive 2014/35/EU
✔️ EMC Directive 2014/30/EU
✔️ RoHS Directive 2011/65/EU
✔️ WEEE Directive 2012/19/EU
✔️ Electromagnetic safety – Tested by the Emitech laboratory

Key benefits of the ATE LC15

Treats the cause of rising damp

Visible results in 18 to 24 months

Safe for people, pets, and plants

Ultra-low power consumption

Maintenance-free, continuous operation

Certified French manufacturing

Fast and free delivery

Installation recommendations

Install between 30 and 100 cm from the floor on a damp load-bearing wall

Keep at least 1.5 m away from electrical appliances

Always leave the device plugged in (negligible consumption)

Check that the 15 m diameter covers the entire damp area

Tips to optimise drying

Remove waterproof plasters or paints 10 cm above the affected area

Ensure good ventilation (natural or mechanical)

Encourage airflow (doors undercut by 1.5 to 2 cm, ventilation grilles)

After drying, brush off surface salts and renovate with a lime plaster + anti-salt additive

If there is lateral water ingress, plan for external drainage

Treatment limitations

It is not designed for:

Pressurised water ingress

Flood-related damage

Direct mould treatment

➡️ These issues require specific additional interventions.