IPG Wall Drying Device – Polarity Inverter Against Moisture in Walls ATG LC15

Wall drying – geomagnetic polarity reversing device against humidity in walls ATG LC15 white.

Anti-humidity solution with ATG geomagnetic inverter.

Drying out walls is one of the treatments for humidity, and the ATG LC15 geomagnetic polarity inverter is an innovative and effective solution to this problem. Rising damp is a physical phenomenon where humidity from the ground rises in the walls, affecting all porous materials in contact with the earth. To stop this phenomenon, the cause must be eliminated, and the ATG LC15 is an optimal solution.

ATG LC15 geomagnetic moisture polarity inverter.

Range 7.5m and maximum action diameter 15m.

Made in France product guaranteed.

Self-install! Quick and easy installation | Advice sheet in the package.

Geomagnetic drying of walls: An innovative and effective solution against humidity

Product advantages:

Does not emit any electromagnetic waves.
Works completely autonomously, without electrical connection or battery.
Radical and definitive solution: solves the problem of humidity in the walls at its origin.
Very easy to install and economical.
Allows you to treat the entire building (walls, pillars, floors, cellar, etc.).
Reduces heating costs as the walls are less humid.
10-year manufacturer warranty.
Made in France.
Simple cylindrical box to install (no work and no assistance required).
By following our installation and usage recommendations, users can typically see significant results within 18-24 months.
All types of buildings affected by humidity: house, cellar, garage, church, cathedral.

What is our ATG LC15 geomagnetic polarity inverter used for?

Signs of a humidity problem? Warping parquet, blistering walls, peeling wallpaper, loose skirting boards, mold stains on walls and ceilings, etc.
Fortunately, there are radical solutions to treat moisture problems at the root.
Our ATG LC15 geomagnetic polarity inverter is the solution to combat humidity in your home, and particularly rising damp.
Rising damp appears as dark spots at the bottom of walls: this is moisture rising up the walls, causing mold and dark spots.
The damage can be significant on floors, ceilings, walls and also on health.
If moisture rises in your walls, it is because water is rubbing against the materials of your floor, which charges it with electricity. It is precisely this electrical charge that gives it the strength to rise in the partitions and floors, and which results in rising damp.

How does our ATG LC15 geomagnetic polarity inverter work?

Our ATG LC15 geomagnetic polarity inverter captures the electromagnetic fields of the water, and sends back a counter-field to stop the water rising. Then, the humidity evaporates little by little and the walls end up being completely dried.
The undeniable advantage of our ATG LC15 geomagnetic polarity inverter is that it does not need an electrical connection or battery to operate, since it is equipped with passive circuits. Thus, it uses the energy of electromagnetic fields, and simply needs to be placed close to the area to be treated.

Technical specifications and recommendations:

IMPLEMENTATION OF THE ATG LC15 GEOMAGNETIC POLARITY INVERTER PROCESS:

The device must be installed at a minimum distance of 1,50 m from any electrical source (except electrical outlets).
It must be positioned at a height of between 1,50 m and 2,00 m from the ground.
The device must be fixed to the wall using glue or double-sided tape and must not be moved after installation.
It should be oriented north using a compass or a compass app on a phone.
The device can be installed on any wall of the house, provided that its dimensions and the diagonal of the building are taken into account to ensure that the effective diameter of the ATG LC15 covers the entire structure.

STRIPPING FILM-FORMING COATINGS OR COATINGS:

It is recommended to strip the bottom of the walls during the drying period to a height of approximately 10 cm above the area of deterioration in order to allow the walls to “breathe”.

VENTILATION OF THE HOUSING:

Good air circulation is necessary to promote drying of the walls by evaporation. It is therefore essential:
To install adequate ventilation in the accommodation.
To ensure that doors and windows meet standards, in particular with doors offset by at least 1,5 cm in dry rooms and 2 cm in damp rooms.
Install window vents to improve ventilation.

RESTORATION OF COATINGS AND PAINTING:

When the walls have dried, the hygroscopic salts, which attract moisture, rise to the surface. It is essential to brush the walls to remove the majority of these salts. To ensure optimal drying and prevent any further rise of mineral salts in the coatings, it is recommended:
To renovate the coatings with a lime coating enriched with a specific adjuvant against hygroscopic salts.

INSTALLING A DRAIN:

In the event of lateral infiltration, it is strongly recommended to set up a drainage system around the house to collect and evacuate groundwater before it reaches the foundations.

IMPORTANT INFORMATION:

Several factors influence the drying speed of walls, including their thickness, composition, coating, as well as strict adherence to our recommendations. This process does not treat water infiltration, flooding or mold, which must be treated separately.