IPE Wall Drying Device – Polarity Inverter Against Moisture in Walls ATE LC30 White

Drying walls – IPE electromagnetic polarity reversing device against humidity in walls ATE LC30 white.

IPE electromagnetic polarity inverter against humidity ATE LC30.

Drying out walls is one of the treatments for humidity, and the ATE LC30 electromagnetic polarity inverter is an innovative and effective solution to this problem. Rising damp is a physical phenomenon where humidity from the ground rises in the walls, affecting all porous materials in contact with the earth. To stop this phenomenon, the cause must be eliminated, and the ATE LC30 is an optimal solution.

Range 15m and maximum action diameter 30m.

Made in France product guaranteed.

Free and fast delivery.

Electronic wall drying: an innovative and effective solution against humidity.

Drying out walls is one of the treatments for humidity. Rising damp is a physical phenomenon caused by humidity rising from the ground into the walls.

We can say that it is a humidity problem. All porous materials in contact with the ground are concerned. The water circulating in the ground comes into contact with the masonry that did not receive a capillary break during construction. To stop the capillary rise, the cause must be eliminated.

Any wall naturally generates an electrical potential difference from the ground, which will propagate humidity. The water then rises through the porosity of the wall, which maintains the potential difference.

The principle of the ATE LC30 electronic drying unit is to generate an opposing electric current in the wall. The drying of damp walls (but also preventive drying) is done using an electronic box placed directly on the wall: the drying unit.

The box emits weak electrical pulses into the wall towards the ground. This reverses the polarity of the electromagnetic fields already present in the wall and forces the water towards the ground.

Drying walls with an electronic unit is one of the main solutions to combat humidity in your walls due to rising damp (when moisture from the ground rises into the walls) or lateral infiltration by hydrostatic pressure. It has several advantages:

Drying out walls does not damage the walls at all: no vibrations, drilling… Faster drying of walls. Treats the cause of the problem. Very suitable for old or fragile walls. Effective.

By following our installation and usage recommendations, users can typically see significant results within 18-24 months.

The natural insulating power of the wall is thus reinforced, with the key to a reduction in heating consumption since the walls will be less humid.

It does not generate noise or harmful waves, and consumes little electricity.

certifications:

-Directive 2014/35/EU (low voltage)

-Directive 2014/30/EU (EMC)

-Non-harmfulness of electromagnetic waves (EMF)

-Directive 2011/65/EU (RoHS)

-Directive 2012/19/EU (WEEE)

Product advantages ATE LC30 electromagnetic polarity inverter against humidity:

Radical and definitive solution: treats the problem of humidity in walls at its origin.
Effective and rapid results: Rising damp is eliminated between 18 and 24 months (depending on the specific features of the building and following the recommendations*).
Reduces heating costs (damp rooms over-consume).
10-year manufacturer warranty.
No harm to the health of people, animals and plants (product certified by the Emitech laboratory).
Easy electrical consumption.
Easy to install, no work, no noise and no dust (telephone support available).
French made.

Technical characteristics Electromagnetic polarity inverter against humidity ATE LC30:

15m range and maximum action diameter 30m

Minimum space requirement: simple box connected to a power outlet.

Safety: the wave emission does not exceed that of household appliances (washing machine, hair dryer, refrigerator, electric oven or microwave).

Current: 12V

Consumption: 0,75W

Dimensions: 322 x 232 x32mm

Warranty: 10 years manufacturer

What is our ATE LC30 electromagnetic polarity reversing dehumidifier used for?

Our ATE LC30 electromagnetic polarity inverter is the solution to humidity problems in your home. It allows you to dry out the walls by causing rising damp to go back down.

How does our ATE LC30 electromagnetic polarity reversing dehumidifier work?

Our ATE LC30 electromagnetic polarity inverter diffuses a very low frequency electromagnetic field, which changes the orientation of water molecules. These molecules then fall back by gravity into the foundations, taking with them some of the salts that cause efflorescence and damp stains. The walls then dry out by natural evaporation of the moisture.

It can be easily installed or fixed in the wet area, without any intervention on the masonry.

Result: your walls will be dry within 18 to 24 months (depending on the specific features of the building and following the recommendations*).

Our recommendations :

1) INSTALLATION OF THE ATE LC30 ELECTROMAGNETIC POLARITY INVERTER:

The device must be placed at least 1.50m from any electrical or electronic device.
Height of the location 30cm minimum up to 1m00 from ground level.
The device should be hung on the wall like a painting.
The device must not be moved.
The device must be placed directly on a load-bearing wall or partition wall (especially not on placo lining).
Know the dimensions of the dwelling (mainly the largest diagonal) in order to determine if the effective diameter of a STOP ONE covers the entire building.
The ATE LC30 electromagnetic polarity inverter must be permanently connected, but its consumption is extremely low (only 0,75W, i.e. a cost of around €15/year).

2) STRIPPING FILM-FORMING COATINGS OR COATINGS

It is recommended to strip the bottom of the walls during the drying period to a height of approximately 10 cm above the degradation edge so that the walls can transpire.

3) VENTILATION OF THE HOUSING

Good air circulation is necessary since drying is partly done by evaporation. It is therefore essential to ventilate.
To install suitable ventilation in your home.
To ensure that doors and windows comply with standards (doors offset at least 1.5 cm in dry rooms and 2 cm in damp rooms.
Installation of window vents.

4) RESTORATION OF COATINGS AND PAINTING

When the walls have dried, the moisture-hungry hygroscopic salts have migrated to the surfaces and it is then essential to brush them to remove most of them. For walls to dry perfectly, not only must the walls be dry and healthy, but it is absolutely essential to prevent mineral salts from rising into the coatings.
We advise you to redo your lime facade coatings with an additive against hygroscopic salts.

5) INSTALLING A DRAIN

It is recommended to make a drain in case of lateral infiltrations. The drainage has the function of collecting groundwater and evacuating it before it reaches the foundations.

*IMPORTANT INFORMATION

Factors that influence how quickly walls dry include their thickness, composition and coating, as well as adherence to our recommendations.

This type of process does not address leaks, flooding issues and mold in your home, these will need to be addressed independently.